Sunload Sensor (Auto A/C Model): Removal

CAUTION: Be careful not to damage the sensors and interior trims when removing.

1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
   NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
2. Remove the sunload sensor.
   1. Release the connector and claws, and remove the grille - front defroster.
      Fig 1: Identifying Front Defroster Grille Connector And Claws

      Courtesy of SUBARU OF AMERICA, INC.
   2. Press the left and right claws to remove the sunload sensor from the grille - front defroster.

Fig 2: Removing Sunload Sensor From Front Defroster Grille

Courtesy of SUBARU OF AMERICA, INC.