Heater Vent Duct: Removal
CAUTION:
Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION
.
- Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY
.NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
- Remove the instrument panel assembly. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Assembly>REMOVAL .
- Remove the screws and remove the duct - center vent (A) and the duct - side ventilation (B) on LH and RH sides.