General Tool

CAUTION: When working on vehicles with a HFC-134a system, only use HFC-134a specified tools and parts. Do not mix CFC-12 tools and parts. If HFC-134a and CFC-12 compressor oil is mixed, it will result in poor lubrication and the compressor itself may be damaged.

In order to prevent the mixture of HFC-134a and CFC-12 parts and liquid, the type of tool and screw, and the replacement valves used are different. The gas leak detectors for the HFC-134a and CFC-12 systems must also not be interchanged.

	HFC-134a	CFC-12
Tool and screw type	Millimeter size	Inch size
Valve type	Quick joint type	Screw-in type

TOOL NAME/ILLUSTRATION	REMARKS
Circuit tester	Used for measuring resistance, voltage and current.
DST-i	Used together with Subaru Select Monitor 4.
WRENCH	Various WRENCHES will be required to service any A/C system. 7 - 40 N.m (0.7 - 4.1 kgf-m, 5 - 30 ft-lb) torque wrench and various crowfoot wrenches will be needed. Open end or flare nut wrenches will be needed to affix the pipe and hose fittings.

Applicator bottle	A small APPLICATOR BOTTLE is recommended to apply compressor oil to the various parts. It can be available at a hardware store.

Manifold gauge set	A MANIFOLD GAUGE SET (with hoses) is available at either a refrigerant supplier or an automotive equipment supplier.

Refrigerant recovery system	A REFRIGERANT RECOVERY SYSTEM is used for the recovery and recycling of A/C system refrigerant after contaminants and moisture have been removed from the refrigerant.

Syringe	A graduated plastic SYRINGE will be needed to add oil into the system. A syringe can be available at a pharmacy or drug store.

Vacuum pump	A VACUUM PUMP is necessary (for a good working condition), and may be available at either a refrigerant supplier or an automotive equipment supplier.

Can tap	A CAN TAP for the 397 g (14 oz) can is available at an automotive equipment supplier.

Thermometer/hygrometer	A Pocket THERMOMETER/HYGROMETER is available at either a industrial hardware store or a refrigerant supplier.

Electronic leak detector	An ELECTRONIC LEAK DETECTOR can be available at either a specialty tool supplier or an A/C equipment supplier.

Weight scale	A WEIGHT SCALE such as an electronic charging scale or a bathroom scale with digital display will be needed, if a 13.6 kg (30 lb) refrigerant container is used.