LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Control Panel >> Inspection >> Check Illumination

Check Illumination

  1. Check the illumination operation when battery voltage is applied between the connector terminals.
    • Manual A/C model
      Fig 1: Identifying HVAC System Control Panel Connector Terminals (Manual A/C Model)
      G11268245Courtesy of SUBARU OF AMERICA, INC.
      Terminal No. Inspection conditions Specification
      14 (+) - 12 (-) Apply battery voltage. Light On
    • Auto A/C model
    Fig 2: Identifying HVAC System Control Panel Connector Terminals (Auto A/C Model)
    G10270294Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    37 (+) - 35 (-) Apply battery voltage. Light On
  2. If it does not operate normally, replace the heater control assembly.
scientia non olet · About LEMON Manuals