LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Control Panel >> Inspection >> Blower Switch (Manual A/C Model)

Blower Switch (Manual A/C Model)

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    Fig 1: Identifying Blower Switch Connector Terminals (Manual A/C Model)
    G11268247Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    - OFF -
    1 - 2, 4 Switch 1 (LO) Less than 1 Ω
    1 - 3, 4 Switch 2 (ML) Less than 1 Ω
    1 - 4, 6 Switch 3 (MH) Less than 1 Ω
    1 - 4, 5 Switch 4 (HI) Less than 1 Ω
  2. Replace the heater control assembly if the inspection result is not within the standard.
scientia non olet · About LEMON Manuals