LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Compressor >> Inspection >> Magnet Clutch Operation Inspection

Magnet Clutch Operation Inspection

  1. Check the magnet clutch operation when battery voltage is applied to the connector terminal.
    Fig 1: Identifying Compressor Magnet Clutch Connector Terminal
    G11245677Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 (+) - chassis ground (-) Apply battery voltage. Conclusion
  2. If it does not operate normally, replace the compressor assembly.
scientia non olet · About LEMON Manuals