LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Blower Resistor (Manual A/C Model) >> Inspection

Blower Resistor (Manual A/C Model): Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    Fig 1: Identifying Blower Resistor Connector Terminals (Manual A/C Model)
    G11268238Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    4 - 3 Always Approx. 0.43 Ω
    4 - 2 Approx. 1.03 Ω
    4 - 1 Approx. 3 Ω
  2. Replace the resistor if the inspection result is not within the standard.
scientia non olet · About LEMON Manuals