LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> General Information >> OEM General Information >> General Information & Specifications >> Pre-Delivery Inspection >> Towing Hook (Eyebolt)

Towing Hook (Eyebolt)

NOTE: At factory shipment, the towing hook (eyebolt) is installed to the rear bumper for securing the vehicle during transportation. Follow the procedure below to store the towing hook (eyebolt) to the holder in the spare tire.
  1. Remove the towing hook (eyebolt) from the rear bumper.
    Fig 1: Identifying Towing Hook (Eyebolt)
    G11263210Courtesy of SUBARU OF AMERICA, INC.
  2. Store the towing hook (eyebolt) to the holder in the spare tire.
    Fig 2: Identifying Towing Hook (Eyebolt)
    G11263211Courtesy of SUBARU OF AMERICA, INC.
  3. Install the supplied rear hook cover to rear bumper.
Fig 3: Identifying Rear Hook Cover
G08315255Courtesy of SUBARU OF AMERICA, INC.