LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> General Information >> OEM General Information >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Static checks just after vehicle receipt

Static checks just after vehicle receipt

STATIC CHECKS JUST AFTER VEHICLE RECEIPT

Item Check point
1. Appearance
  1. If the vehicle is covered with protective coating, visually check the vehicle body for damage and dents. If the protective coating has been removed, visually check the painted body surfaces in detail for damage or rust.
  2. Visually check the glass and light lenses for any damage, cracks or excessive gaps between body sheet metal.
  3. Visually check the plated parts for any damage.
  4. Check the instrument panel, console and trim for stains or dirt.
2. Tire
  1. Check the tires for damage, defective, and dents on wheels.
  2. Check the tire air pressure.
3. Fuse installation If the vehicle is about to be delivered to customer, attach a back-up fuse.
4. Door lock/unlock and open/close operations
  1. Using the key, check the door can be locked or unlocked normally.
  2. Open and close all doors to check that there are no problems.
  3. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
5. Child safety lock Check the child safety lock system operates normally.
6. Rear gate lock/unlock and open/close operations
  1. Open and close the rear gate to check that there are no problems.
  2. Check if the rear gate can be opened normally through the emergency hole.
  3. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
7. Power rear gate Check if the power rear gate operates normally.
8. Fuel lid opener lock release lever Operate the fuel lid opener to check that the fuel filler lid can be unlocked normally.
9. Towing hook (eyebolt) At factory shipment, the towing hook (eyebolt) is installed to the rear bumper. Remove the towing hook (eyebolt), store it in the holder.
10. Accessory Check that the following accessories are equipped.
  • Owner's manual
  • Warranty booklet
  • Maintenance note
  • Spare key
  • Key No. plate
  • Jack
  • Tool set
  • Spare tire
  • Towing hook
11. Front hood lock release Operate the front hood lock release lever to check that the front hood opens normally.
12. Battery Check the battery for any abnormal conditions such as rust or traces of battery fluid leaks.
13. Brake fluid Check the brake fluid amount.
14. Engine oil Check the engine oil amount.
15. CVTF Check for leakage of CVTF.
16. Transmission gear oil Check that the transmission gear oil level is normal.
17. CVT front differential oil Check for leakage of CVT front differential oil.
18. Rear differential gear oil Check for leakage of gear oil from the rear differential.
19. Engine coolant Check the engine coolant level.
20. Clutch fluid Check the clutch fluid amount.
21. Window washer fluid Check the window washer fluid amount.
22. Front hood latch Check that the front hood is closed normally and locked securely.
23. Keyless entry system Check that the keyless entry system operates normally.
24. Keyless access system Check that the keyless access system operates normally.
25. Alarm system Check that the alarm system operates normally.
26. Seat
  1. Check the seat surfaces for stains or dirt.
  2. Check the seat installation conditions and functionality.
27. Seat belt Check the seat belt installation conditions and functionality.
28. Grommet installation Install the grommet provided in the glove box to the tie-down hole.
29. TPMS (U.S. model) If the display of TPMS warning light does not operate normally, perform the diagnosis by referring to TPMS (Diagnosis).
scientia non olet · About LEMON Manuals