LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> General Information >> OEM General Information >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Checks with the engine running

Checks with the engine running

CHECKS WITH ENGINE RUNNING

Item Check point
30. Delivery (test) mode Turn the ignition switch to ON and check that the malfunction indicator light starts blinking.
31. Immobilizer system
  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. Check that the security indicator light operates normally.
32. Push button start Using the push button start function of the access key equipped with the vehicle, check that the engine starts and stops.
33. Starting condition Start the engine and check that the engine starts smoothly.
34. Exhaust system Check that the exhaust noise is normal and no leaks are found.
35. Indicator and warning lights Check that all indicator lights and warning lights are operating correctly.
36. Heater & ventilation Check that the heater & ventilation system operates normally.
37. Air conditioner Check that the air conditioner operates normally.
38. Multi-function display (MFD) Check that the Multi-Function Display (MFD) function operates normally.
39. Audio Check the radio and AUX operate normally.
40. Navigation Check the navigation and AUX operate normally.
41. Telematics system Check that the indicator light on the overhead console or on the stereo camera cover assembly goes off.
42. Accessory power supply socket Check that the accessory power supply socket operates normally.
43. Lighting system Check that the lighting system operates normally.
44. Illumination control Check that the illumination control operates normally.
45. Window washer system Check that the window washer system operates normally.
46. Wiper system Check that the wiper system operates normally.
47. Wiper deicer Check that the wiper deicer operates normally.
48. Power window Check that the power window operates normally.
49. Sunroof Check that the sunroof operates normally.
50. Rear defogger system Check that the rear defogger system operates normally.
51. Door mirror Check that the remote control mirror and heated mirror operate normally.
52. Steering heater Check that the steering heater operates normally.
53. Parking brake Check that the parking brake operates normally.
54. Blind Spot Detection/Rear Cross Traffic Alert (BSD/RCTA)
  1. Press the BSD/RCTA OFF switch several times to check that the system is activated and deactivated correctly.
  2. Check the rear bumper around the sensor for dirt, scratch, affixed stickers and poor paint coating.
55. Reverse Automatic Braking (RAB)
  1. Check that the RAB system is activated and deactivated correctly.
  2. Check the sonar sensor installed on the rear bumper for parts missing, dirt, scratch, foreign objects, etc.
56. Diagnostic trouble code (DTC) check Check that the diagnostic trouble code (DTC) is not detected.