Converter Case: Assembly
WARNING: This page is about a different variant/trim than selected.
- Install the oil drain plug.
Tightening torque:
70 N.m (7.1 kgf-m, 51.6 ft-lb)
- Install the overflow drain plug.NOTE: Overflow drain plug of differential gear oil is temporarily attached.
- Install all plugs.NOTE: Use new O-rings.
Tightening torque:
T1: 22 N.m (2.2 kgf-m, 16.2 ft-lb)
T2: 22.5 N.m (2.3 kgf-m, 16.6 ft-lb)
- Install the pitching stopper bracket and transmission radio ground cord.CAUTION: Be careful not to deform or damage the terminal of transmission radio ground cord.
Tightening torque:
41 N.m (4.2 kgf-m, 30.2 ft-lb)