CVTF Cooler (With Warmer Function): Inspection

Replace any faulty CVTF cooler hoses and clamps found in the inspection below.

1. Check that there are no CVTF or engine coolant leaks from the connections.
2. Check the clamp for deformation.
3. Lightly bend the CVTF cooler hose and check for cracks in the surface or other damages.
4. Pinch the CVTF cooler hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail.
5. Check for peeling, cracks, and deformation at the tip of the hose.
6. Check the CVTF cooler (with warmer feature) for any damage.