LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission Control Systems (Aux. Emission Control Devices) (H4DO)) >> PCV Valve >> Installation

PCV Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the PCV valve onto the cylinder block RH.
    NOTE: Apply liquid gasket to the bolt threads of PCV valve.

    Liquid gasket: 

    THREE BOND 1324 (Part No. 004403042) or equivalent

    Tightening torque: 

    23 N.m (2.3 kgf-m, 17.0 ft-lb)

  2. Connect the PCV hose to the intake manifold assembly and the PCV valve.
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Boot>INSTALLATION .
scientia non olet · About LEMON Manuals