LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission Control Systems (Aux. Emission Control Devices) (H4DO)) >> EGR Pipe >> Installation

EGR Pipe: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the EGR pipe to the intake manifold assembly and EGR control valve.
    NOTE: Use a new gasket.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the throttle body. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Throttle Body>INSTALLATION .
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Boot>INSTALLATION .
scientia non olet · About LEMON Manuals