Cam Sprocket RH

WARNING: This page is about a different variant/trim than selected.

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.

INTAKE CAM SPROCKET RH
1. Remove the chain cover. Ref. to MECHANICAL(H4DO)>Chain Cover>REMOVAL .
2. Remove the timing chain RH. Ref. to MECHANICAL(H4DO)>Timing Chain Assembly>REMOVAL>TIMING CHAIN RH .
3. Hold the intake cam sprocket RH using the ST1 and ST2, and remove the bolts using the ST3.
  CAUTION: Perform the operation carefully since the ST comes off easily.
  
  ST1 18355AA000 PULLEY WRENCH
  
  ST2 18334AA020 PULLEY WRENCH PIN SET
  
  ST3 18270KA010 SOCKET
  
  Fig 1: Removing Bolts Using ST3
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the intake cam sprocket RH.
EXHAUST CAM SPROCKET RH
1. Remove the chain cover. Ref. to MECHANICAL(H4DO)>Chain Cover>REMOVAL .
2. Remove the timing chain RH. Ref. to MECHANICAL(H4DO)>Timing Chain Assembly>REMOVAL>TIMING CHAIN RH .
3. Hold the exhaust cam sprocket RH using the ST1, ST2 and ST3, and remove the bolts using the ST4.
  ST1 18355AA000 PULLEY WRENCH
  
  ST2 18334AA040 PULLEY WRENCH PIN SET
  
  ST3 18334AA020 PULLEY WRENCH PIN SET
  
  ST4 18270KA010 SOCKET
  
  Fig 2: Removing Bolts Using ST4
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the exhaust cam sprocket RH.