SUBARU Select Monitor
WARNING: This page is about a different variant/trim than selected.
- On [Start] display, 1. select [Diagnosis].
- On [Vehicle selection] display, enter vehicle information and select [OK].
- On [Main Menu] display, select [Each System].
- On [Select System] display, select [Engine Control System] and select [Enter].
- On [Select Function] display, select [DTC].
NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DO)>List of Diagnostic Trouble Code (DTC) .