Malfunction Indicator Light Does Not Go Off

WARNING: This page is about a different variant/trim than selected.

Trouble symptom:

Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.

CHECK DTC.
Is DTC of engine or LAN system displayed? Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Read Diagnostic Trouble Code (DTC)>OPERATION .
- Yes: Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DO)>List of Diagnostic Trouble Code (DTC) . Ref. to LAN SYSTEM (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC) .
- No: Check the combination meter system. Ref. to COMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure .