LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Cooling System (H4DO)) >> Radiator Main Fan and Fan Motor >> Disassembly

Radiator Main Fan and Fan Motor: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator side gasket from the radiator main fan shroud.
    NOTE: This operation is required only when replacing the radiator side gasket.
  2. Remove the clip which holds the main fan motor connector onto the radiator main fan shroud.
  3. Disconnect the radiator main fan from the main fan motor.
    Fig 1: Locating Main Fan Motor Connector Clip
    G08315784Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the main fan motor from the radiator main fan shroud.
Fig 2: Locating Radiator Main Fan Shroud Bolts
G08315785Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals