LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Starting System & Charging System (H4DO)) >> Battery Sensor >> Installation

Battery Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Install the battery sensor to the position where removal/installation of the vent plug is not interfered.

Tightening torque: 

6 N.m (0.6 kgf-m, 4.4 ft-lb)

scientia non olet · About LEMON Manuals