Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters | Execution condition |
|---|---|
| (1) - 1 Initial routine | |
| (1) - 2 Ignition switch | ON |
| (1) - 2 Battery voltage | ≥ 6.2V |
| (1) - 2 Electronic throttle control relay | ON |
| (2) Ignition switch | ON |
| (3) Ignition switch | ON |
| (3) Battery voltage | ≥ 6.2V |
| (3) Electronic throttle control relay | ON |
| (4) Ignition switch | ON |
| (5) Initial routine |