Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9V |
| Barometric pressure | ≥ 75.1kPa (563mmHg, 22.2inHg) |
| Activation of soaking timer | Completed |
| Engine coolant temperature | ≥ 4.4°C (39.9°F) and < 45°C (113°F) |
| Accumulated purge amount during previous driving cycle | ≥ Map 1 |
Map 1
MAP 1 SPECIFICATION
| Engine coolant temperature °C (°F) | 0 (32) | 30 (86) | 35 (95) | 40 (104) | 45 (113) |
|---|---|---|---|---|---|
| Accumulated purge amount during previous driving cycle g (oz) | 128 (4.51) | 128 (4.51) | 368 (12.98) | 608 (21.44) | 848 (29.91) |