Mode E (Measurement Of Reference Pressure For Judgment)
Judgment 1
Purpose: Judge the reference pressure stability.
Judge as NG when the following conditions are established.
Judgment 2
Purpose: Judge whether the reference pressure is within the normal range, and detect the vacuum pump and orifice malfunctions. Judge the vacuum pump performance stability.
Judge as NG when the following conditions are established.
Judgment 3
Purpose: Judge the presence of evaporative emission system leak.
Judge as NG when the following conditions are established.
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| Judgment 1 |Pressure sensor maximum output value - Pressure sensor minimum output value| |
> 314Pa (2.355mmHg, 0.1i nHg) | P2404 |
| or Judgment 2 Reference pressure for judgment |
< Value of Map 4 or > Value of Map 5 |
P2404 |
| or Judgment 3 |Reference pressure for setting the target negative pressure - Reference pressure for judgment| |
> 941Pa (7.058mmHg, 0.3i nHg) |
P2404 |
| Barometric pressure kPa (mmHg, inHg) | 70 (525, 20.7) | 80 (600, 23.6) | 90 (675, 26.6) | 100 (750, 29.5) |
|---|---|---|---|---|
| Reference pressure for judgment kPa (mmHg, inHg) | -4.5 (-34.0, -1.3) | -4.6 (-34.8, -1.4) | -4.7 (-35.6, -1.4) | -4.9 (-36.4, -1.4) |
| Barometric pressure kPa (mmHg, inHg) | 70 (525, 20.7) | 80 (600, 23.6) | 90 (675, 26.6) | 100 (750, 29.5) |
|---|---|---|---|---|
| Reference pressure for judgment kPa (mmHg, inHg) | -0.8 (-6.2, -0.2) | -0.9 (-7.0, -0.3) | -1 (-7.8, -0.3) | -1.1 (-8.58, -0.3) |
Time needed for diagnosis: Approx. 24 min
At next engine start, confirm whether the enable conditions are satisfied even though refueling has been done during soaking, and determine the malfunction.
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.