Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | ≥ 75.1kPa (563mmHg, 22.2inHg) |
| Amount of intake air | < 7.5g/s (0.26oz/s) |
| Accelerator pedal position | = 0% |
| Rear oxygen output voltage after fuel cut | < 0.15V |
| Estimated catalyst temperature | ≥ 480°C (896°F) (CVT model) ≥ 550°C (1022°F) (MT model) |
| Estimated temperature of the rear oxygen sensor element | ≥ 500°C (932°F) |
| ((Fuel system status | = Fuel cut |
| Integrated amount of intake air mass during Fuel cut) | ≥ 12.95g (0.46oz) |
| followed by Fuel system status) | Fuel cut |