Execution Condition: Notes
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 8V |
| Throttle position change during 16 milliseconds | < 21° (CVT model) < 21° (MT model) |
| Fuel shut-off | Not in operation |
| Engine speed | 475 RPM - 6100 RPM (CVT model) 500 RPM - 6500 RPM (MT model) |
| Intake manifold pressure | > Value from Map |
| Time elapsed after engine start | ≥ 2 crankshaft revolutions |
| Following condition A or B is met A: Engine coolant temperature at engine starting |
> -7°C (19°F) |
| B: Following conditions (b1) and (b2) are met | ≤ -7°C (19°F) |
| (b1) Engine coolant temperature at engine starting (b2) Engine coolant temperature | ≥ 21°C (70°F) |