Execution Condition
WARNING: This page is about a different variant/trim than selected.
- DIAGNOSIS 1
Secondary Parameters Execution condition Battery voltage ≥ 10.9 V Soaking time ≥ 21600s Block heater judgment Completed Block heater operation Not in operation - DIAGNOSIS 2
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Engine coolant temperature | ≥ 60°C (140°F) |
| Integrated value of intake air amount | ≥ Value of Map 1 |
| Number of experiences under following driving conditions | ≥ 3time(s) |
|
≥ 15s ≥ 40km/h (24.9MPH) ≥ 10g/s (0.35oz/s) |
|
≥ Map 2 < 4 km/h (2.5 MPH) |
MAP 1 SPECIFICATION
| Engine coolant temperature °C (°F) | -30 (-22) | -10 (14) | 0 (32) | 10 (50) | 25 (77) |
|---|---|---|---|---|---|
| Intake air amount sum value (g (oz)) | 30500 (1075.74) | 24000 (846.48) | 20500 (723.04) | 15000 (529.05) | 5500 (193.99) |
MAP 2 SPECIFICATION
| Engine coolant temperature °C (°F) | -30 (-22) | 0 (32) | 10 (50) | 25 (77) |
|---|---|---|---|---|
| Duration of driving condition 2 (s) | 250 | 40 | 32 | 15 |