Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters | Execution condition |
|---|---|
| <Timer diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| Elapsed time after starting the engine | > 600 s and < 61380 s |
| <Full count diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| Counter in ECM | ≥ 4 s |
| <Soaking timer IC setting diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| <Timer diagnosis (during soaking)> | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| <Wake-up diagnosis> | |
| Ignition switch | ON |
| Time in the soaking timer IC | > 3600s |