Transfer Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.

Using the ST, install the taper roller bearing (transfer case side).
CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

NOTE: Be careful when handling because the taper roller bearing and the outer race are used as a set.

ST 927640000 INSTALLER

Fig 1: Identifying Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the taper roller bearing (extension case side).
CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

NOTE: Be careful when handling because the taper roller bearing and the outer race are used as a set.

ST1 498175500 INSTALLER

ST2 899864100 REMOVER

Fig 2: Identifying Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.