LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transaxle & Differential) >> Transfer Case and Extension Case Assembly >> Assembly >> Transfer Case

Transfer Case

WARNING: This page is about a different variant/trim than selected.
  1. Install the shift link assembly to the transfer case. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>Shift Link Assembly>INSTALLATION .
  2. Install the interlock plate.
NOTE:
  • Use a new bolt and gasket.
  • Clean the bolt threads before installing the interlock plate.

Tightening torque: 

20 N.m (2.0 kgf-m, 14.8 ft-lb)

Fig 1: Identifying Interlock Plate And Precoat Bolt
G11267837Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals