Reverse Idler Gear ASSY

WARNING: This page is about a different variant/trim than selected.

Attach the reverse idler sub gear and reverse idler spring.
NOTE: Point the stamp (marking A) towards the outside, and install the reverse idler sub gear.

Fig 1: Exploded View Of Reverse Idler Gear Assy
Courtesy of SUBARU OF AMERICA, INC.
Install the friction plate and snap ring.
NOTE: Make sure the friction plate is installed in the proper direction.

Fig 2: Identifying Friction Plate And Snap Ring

Courtesy of SUBARU OF AMERICA, INC.