LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transaxle & Differential) >> Front Differential Assembly >> Assembly >> Differential Side Retainer

Differential Side Retainer

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the oil seal by lightly tapping with a plastic hammer.
    NOTE:
    • Use a new oil seal.
    • Apply transmission gear oil to the oil seal lips, and install the oil seal while being careful not to deform the lip.
    • Check the identification marks (L, R), and attach the oil seals RH and LH.

      ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER 

    Fig 1: Installing Oil Seal Using ST
    G11267985Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-rings.
    NOTE:
    • Use new O-rings.
    • Apply transmission gear oil to O-ring.
    • Do not stretch or damage the O-ring.
    • Install the O-ring after adjusting the hypoid driven gear backlash and completing the tooth contact inspection.
Fig 2: Identifying O-Rings
G08548756Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals