Front Exhaust Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.

Install each cover to the front exhaust pipe.
Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)
Install the center exhaust pipe to front exhaust pipe.
NOTE: Use a new gasket.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)
Install the front oxygen (A/F) sensor and rear oxygen sensor to the front exhaust pipe. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Front Oxygen (A/F) Sensor>INSTALLATION . Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Rear Oxygen Sensor>INSTALLATION .