LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Intake System (Induction) (H4DO)) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip (A) from the air intake boot.
  2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.
  3. Loosen the clamp (C) which secures the throttle body to the air intake boot.
    Fig 1: Removing Clip From Air Intake Boot
    G11263279Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose and remove the air intake boot.
scientia non olet · About LEMON Manuals