LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Intake System (Induction) (H4DO)) >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

CAUTION: Be sure to use SUBARU genuine air cleaner element depending on the engine type when replacing the air cleaner elements. Using other air cleaner element may affect the engine performance.
NOTE:
  • Check that there is no dirt or dust within the air cleaner case. If any dirt or dust is found, clean it.
  • Install the air cleaner element as shown in the figure.
    Fig 1: Identifying Air Cleaner Element Related Components
    G11263617Courtesy of SUBARU OF AMERICA, INC.
  • If the protrusion of the air cleaner case (rear) is removed when removing the air cleaner element, align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.
Fig 2: Aligning Protrusion Of Air Cleaner Case (Rear) To Hole On Air Cleaner Case (Front)
G07664974Courtesy of SUBARU OF AMERICA, INC.