DTC P2007 TGV Control Stuck Closed Bank 2: Notes
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Clear Memory Mode>OPERATION
. and Inspection Mode Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Inspection Mode>PROCEDURE
.
- CHECK FOR ANY OTHER DTC ON DISPLAY.
Is any other DTC displayed?
- Yes : Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>List of Diagnostic Trouble Code (DTC) .
- No : Go to 2.
- CHECK TUMBLE GENERATOR VALVE LH.
- Remove the tumble generator valve assembly LH.
- Check the tumble generator valve.
Is there any dirt or clogging with foreign objects in the tumble generator valve?
- Yes : Clean the tumble generator valve.
- No : Replace the tumble generator valve LH. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Tumble Generator Valve Assembly .