Execution Condition
| Secondary Parameters | Execution condition |
|---|---|
| <Idle speed diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | ≥ 75 kPa (563 mmHg, 22.2 inHg) |
| Vehicle speed | ≤ 2 km/h (1.2 MPH) |
| Engine coolant temperature | ≤ 75°C (167°F) |
| Throttle position | < 0.37°CA |
| Integrated value of intake air amount | < Value from Map |
| Elapsed time after gear position change (P ←→ D or N ←→ D) |
≥ 3000 ms |
| Elapsed time after starting the engine | ≥ 2000 ms |
| <Final ignition timing diagnosis> | |
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | ≥ 75 kPa (563 mmHg, 22.2 inHg) |
| Vehicle speed | ≤ 2 km/h (1.2 MPH) |
| Engine coolant temperature | ≤ 75°C (167°F) |
| Throttle position | < 0.37°CA |
| Integrated value of intake air amount | < Value from Map |
| Elapsed time after gear position change (P ←→ D or N ←→ D) |
≥ 3000 ms |
| Target retard amount | ≥ 10°CA |
MAP SPECIFICATION
| Engine coolant temperature at engine starting °C (°F) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (-14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) |
|---|---|---|---|---|---|---|---|---|
| Integrated value of intake air amount g (oz) | 833 (26.38) | 833 (26.38) | 750 (26.45) | 683 (24.09) | 683 (24.09) | 683 (24.09) | 633 (22.33) | 633 (22.33) |
| Engine coolant temperature at engine starting °C (°F) | 40 (104) | 50 (122) | 60 (140) | 70 (158) | 75 (167) |
|---|---|---|---|---|---|
| Integrated value of intake air amount g (oz) | 607 (21.41) | 607 (21.41) | 553 (19.5) | 467 (16.47) | 467 (16.47) |