Diagnostic Method
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| <Phase 1> | |
| Evaporative Leak Check Module pressure (gauge) | > -267 KPa |
| <Phase 2> | |
| Evaporative Leak Check Module pressure (gauge) | < 267 KPa |
Judgment 1
Time Needed for Diagnosis: 6 seconds
Judgment 2
Time Needed for Diagnosis: 20 seconds
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.