DTC P0244 Turbocharger/Supercharger WASTEGATE Solenoid "A" Range/Performance: Notes
DTC detecting condition:
Immediately at fault recognition
Trouble symptom:
Poor driving performance
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Clear Memory Mode>OPERATION
. and Inspection Mode Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Inspection Mode>PROCEDURE
.
- CHECK FOR ANY OTHER DTC ON DISPLAY.
Is any other DTC displayed?
- Yes: Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>List of Diagnostic Trouble Code (DTC) .
- No: Go to 2.
- CHECK WASTEGATE ACTUATOR PIPING AND WASTEGATE CONTROL SOLENOID VALVE PIPING.
Are there any damage or disconnection of hose in wastegate actuator piping or wastegate control solenoid valve piping?
- Yes: Connect the wastegate actuator pipe or wastegate control solenoid valve pipe properly. If defective, replace the hose.
- No: Replace the wastegate control solenoid valve. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Wastegate Control Solenoid Valve .