LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H4DOTC) >> Rocker Cover >> Removal >> Rocker Cover RH

Rocker Cover RH

NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. When working on the vehicle
    NOTE: When working on the vehicle, perform the following steps also.
    1. Remove the air cleaner case. Ref. to INTAKE (INDUCTION) (H4DOTC)>Air Cleaner Case>REMOVAL .
  2. Remove the #1 ignition coil and the #3 ignition coil. Ref. to IGNITION(H4DOTC)>Ignition Coil>REMOVAL .
  3. Remove the rocker cover RH.
    Fig 1: Locating Rocker Cover RH Bolts
    G09480356Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the rocker cover gasket RH, #1 spark plug pipe gasket and #3 spark plug pipe gasket, and remove the liquid gasket.
CAUTION:
  • When removing the liquid gasket from engine unit using scraper, use special care not to damage the cam lobe of camshaft RH.
  • If the cam lobe of camshaft RH interferes, turn the crankshaft to the position where the scraper does not touch.
Fig 2: Precaution For Removing Liquid Gasket From Engine Unit Using Scraper
G10291866Courtesy of SUBARU OF AMERICA, INC.
Fig 3: Locating Spark Plug Pipe Gasket
G09480358Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals