LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H4DOTC) >> Cam Carrier >> Disassembly >> Cam Carrier RH

Cam Carrier RH

  1. Remove the oil pipe from cam carrier RH.
    Fig 1: Locating Oil Pipe From Cam Carrier RH With Bolts
    G09480450Courtesy of SUBARU OF AMERICA, INC.
  2. Loosen the bolts (front camshaft cap RH, intake center camshaft cap RH, intake rear camshaft cap RH, exhaust center camshaft cap RH, and exhaust rear camshaft cap RH) equally, a little at a time in numerical sequence as shown in the figure, and remove each camshaft cap.
    NOTE: Arrange camshaft caps in order so that they can be installed in their original positions.
    Fig 2: Camshaft Caps Bolts Loosening Sequence
    G09480451Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake camshaft RH and the exhaust camshaft RH from cam carrier RH.
    Fig 3: Locating Intake Camshaft RH And Exhaust Camshaft RH From Cam Carrier RH
    G09480452Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the filter from cam carrier RH.
    Fig 4: Locating Filter From Cam Carrier RH
    G09480453Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the liquid gasket from cam carrier RH and front camshaft cap RH, intake rear camshaft cap RH and exhaust rear camshaft cap RH.
scientia non olet · About LEMON Manuals