LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (H4DOTC) >> Water Pipe Assembly >> Removal >> Water Pipe Assembly RH

Water Pipe Assembly RH

  1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
  2. Drain engine coolant. Ref. to COOLING (H4DOTC)>Engine Coolant>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  3. Remove the oil pipe assembly. Ref. to LUBRICATION(H4DO)>Oil Pipe>REMOVAL>OIL PIPE ASSEMBLY .
  4. Remove the front exhaust pipe. Ref. to EXHAUST(H4DOTC)>Front Exhaust Pipe>REMOVAL .
  5. Disconnect the water hose (A) from the water pipe assembly RH, and remove the bolt (B) securing the water pipe assembly RH to the cam carrier RH.
    Fig 1: Identifying Water Hose And Bolt
    G09476398Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bolt (A) which secures the water pipe assembly RH to the cylinder head RH.
  7. Disconnect the water pipe hose RH (B) from oil pan upper, and remove the water pipe assembly RH.
Fig 2: Identifying Bolt And Water Pipe Hose
G09480755Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals