Radiator Main Fan and Fan Motor: Disassembly

1. Remove the radiator side gasket from the radiator main fan shroud.
   NOTE: This operation is required only when replacing the radiator side gasket.
2. Remove the clip which holds the main fan motor connector onto the radiator main fan shroud.
3. Disconnect the radiator main fan from the main fan motor.
   Fig 1: Locating Radiator Main Fan Bolt

   Courtesy of SUBARU OF AMERICA, INC.
4. Disconnect the main fan motor from the radiator main fan shroud.

Fig 2: Locating Radiator Main Fan Shroud Bolts

Courtesy of SUBARU OF AMERICA, INC.