LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control Systems (Aux. Emission Control Devices) (H4DOTC) >> PCV Hose Assembly >> Inspection >> Blow-By Diagnosis Connector

Blow-By Diagnosis Connector

  1. Check that the blow-by diagnosis connector has no deformation, cracks or other damages.
  2. Check the resistance between blow-by diagnosis connector terminals.
    Fig 1: Checking Resistance Between Blow-By Diagnosis Connector Terminals Shown on Connector End View
    G08315385Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Standard
    1 and 2 Less than 1 Ω
scientia non olet · About LEMON Manuals