Combination Meter: Installation
CAUTION:
- Make sure the electrical connector is connected securely.
- Make sure that each meter operates normally.
- When the combination meter assembly has been replaced, be sure to perform the following operations.
- For models without the keyless access with push button start except for C0 and C5, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type B" described in "REGISTRATION MANUAL FOR IMMOBILIZER".
- Be sure to reset the ODO fuel economy value of the multi-function display (MFD). (High grade type) Ref. to INSTRUMENTATION/DRIVER INFO>Multi-function Display (MFD) System>OPERATION>ODO FUEL ECONOMY VALUE RESET (HIGH GRADE TYPE ONLY) .
- Install each part in the reverse order of removal.
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .