Rear Hub Unit Bearing: Assembly

Install the hub unit COMPL - rear axle to the ST securely.
Preparation tool:

ST: HUB STAND (927080000)

Fig 1: Installing Complete Rear Axle Hub Unit
Courtesy of SUBARU OF AMERICA, INC.
Using a press, press new bolts - hub (b) until their seating surfaces contact the hub unit COMPL - rear axle (a).
NOTE: Use the 12 mm (0.47 in) dia. holes in the HUB STAND to prevent bolts from tilting.

Fig 2: Pressing Complete Rear Axle Hub Unit And Hub Bolts

Courtesy of SUBARU OF AMERICA, INC.