|
|
20099PA010 |
INSTALLER & REMOVER |
- Used for replacing the bushing - trailing link of the housing assembly - rear axle.
- Used together with BUSHING REMOVER (20099FG000).
|
|
|
20099FG000 |
BUSHING REMOVER |
- Used for replacing the bushing - trailing link of the housing assembly - rear axle.
- Used together with base part of INSTALLER & REMOVER (20099PA010).
|
|
|
28099AC000 |
BOOT BAND PLIER |
Used for tightening the band - boot. (For front drive shaft) |
|
|
925091000 |
BAND TIGHTENING TOOL |
Used for tightening the band - boot.
- Jig for the band
- Ratchet wrench
|
|
|
18675AA000 |
DIFFERENTIAL SIDE OIL SEAL INSTALLER |
Used for installing the differential side retainer oil seal. |
|
|
926470000 |
AXLE SHAFT PULLER |
- Used for removing the drive shaft.
- Used together with AXLE SHAFT PULLER PLATE (28099PA110).
|
|
|
28099PA110 |
AXLE SHAFT PULLER PLATE |
Exchange with the plate of the AXLE SHAFT PULLER (926470000) to use. |
|
|
927080000 |
HUB STAND |
Used for assembling the bolt - hub of the hub. |
|
|
28399AG000 |
HUB STAND |
Used for extracting the bolt - hub. |
|
|
28399SA010 |
OIL SEAL PROTECTOR |
- Used for installing front drive shaft into front differential.
- For protecting the oil seal.
|
|
|
28099PA090 |
OIL SEAL PROTECTOR |
- Used for installing the rear drive shaft to the rear differential.
- For protecting the oil seal.
|