LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> A/T & M/T Differentials >> Rear Differential Side Oil Seal >> Replacement

Rear Differential Side Oil Seal: Replacement

  1. Remove the rear differential. Ref. to DIFFERENTIALS>Rear Differential (T-type)>REMOVAL  Ref. to DIFFERENTIALS>Rear Differential (VA-type)>REMOVAL .
  2. Remove the rear differential side oil seal using a ST or screwdriver wrapped with vinyl tape to prevent the side retainer from scratching.

    ST 398527700 PULLER ASSY 

    Fig 1: Removing Rear Differential Side Oil Seal Using Special Tool
    G10323593Courtesy of SUBARU OF AMERICA, INC.
  3. Using the ST, install the oil seal.
    CAUTION: Pay attention to the left and right of the oil seal.
    NOTE:
    • Use a new oil seal.
    • Apply differential gear oil to the oil seal lips.
    • T-type

    ST 398437700 OIL SEAL INSTALLER 

    Fig 2: Installing Rear Differential Oil Seal Using Special Tool (T-Type)
    G10323594Courtesy of SUBARU OF AMERICA, INC.
    • VA1-type

    ST 498447100 INSTALLER 

    Fig 3: Installing Rear Differential Oil Seal Using Special Tool (VA1-Type)
    G05343284Courtesy of SUBARU OF AMERICA, INC.
  4. Install the rear differential. Ref. to DIFFERENTIALS>Rear Differential (T-type)>INSTALLATION . Ref. to DIFFERENTIALS>Rear Differential (VA-type)>INSTALLATION .