LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> A/T & M/T Differentials >> General Description >> Preparation Tool >> Special Tool

Special Tool

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05032444
 398477701 HANDLE
  • Used for installing the rear bearing race.
  • Used for installing the front bearing race.
G05342961
 398477702 DRIFT
  • Used for installing the front bearing race. (T-type)
  • Used for installing the rear bearing race. (VA1-type)
  • Used for installing side bearing race. (VA1-type)
G05032445
 398217700 ATTACHMENT SET Stand for rear differential carrier disassembly and assembly.
G05032446
 498447120 INSTALLER Used for installing the front oil seal.
G05032447
 498427200 FLANGE WRENCH Used for stopping rotation of companion flange when removing and tightening self-lock nut.
G05342965
 398467700 DRIFT Used for removing drive pinion shaft, pilot bearing and front bearing cone.
G05002914
 399780104 WEIGHT
  • Used for installing the front bearing cone and the companion flange.
  • Used for installing the pilot bearing.
G05002459
 899580100 INSTALLER Used for installing the front bearing cone and the pilot bearing.
G05002937
 899904100 STRAIGHT PIN REMOVER
  • Used for removing and installing the pinion mate shaft lock pin. (T-type)
  • Used for removing and installing the pinion mate shaft spring pin. (VA1-type)
G05002441
 498247001 MAGNET BASE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used together with DIAL GAUGE (498247100).
G05002442
 498247100 DIAL GAUGE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used together with MAGNET BASE (498247001).
G05342971
 398507704 BLOCK Used for adjusting pinion height and preload.
G05002948
 398177700 INSTALLER Used for installing the rear bearing cone. (T-type)
G05342973
 398457700 ATTACHMENT Used for removing the side retainer. (T-type)
G05032452
 398477703 DRIFT 2 Used for installing the rear bearing race. (T-type)
G04994005
 398437700 OIL SEAL INSTALLER Used for installing the side oil seal. (T-type)
G05342976
 398507702 DUMMY SHAFT Used for adjusting pinion height and preload. (T-type)
G05342977
 398507703 DUMMY COLLAR
  • Used for adjusting pinion height and preload. (T-type)
  • Used for installing the front bearing cone. (T-type)
G05032454
 398517700 REPLACER Used for removing rear bearing cone. (T-type)
G04990233
 398487700 DRIFT Used for installing side bearing cone. (T-type)
G05342980
 398507701 DIFFERENTIAL CARRIER GAUGE Used for adjusting pinion height. (T-type)
G05002431
 398527700 PULLER ASSY
  • Used for removing front oil seal.
  • Used for removing the side bearing race. (T-type)
  • Used for removing side oil seal.
G05662504
 398417700 DRIFT Used for installing side bearing race. (T-type)
G11254778
 28099PA090 OIL SEAL PROTECTOR Used for installing the rear drive shaft to the rear differential. (For oil seal protection)
G11254779
 28099PA100 DRIVE SHAFT REMOVER Used for removing the rear drive shaft from rear differential. (T-type)
G05032458
 399703600 PULLER ASSY Used for removing companion flange.
G05032459
 899874100 INSTALLER Used for installing the companion flange.
G11254782
 18759AA000 PULLER ASSY Used for removing the side bearing cone. (T-type)
G05335681
 18630AA010 WRENCH COMPL RETAINER
  • Used for removing and installing the side retainer. (VA1-type)
  • WRENCH ASSY (499787000) can also be used.
G05342994
 498175500 INSTALLER Used for installing the rear bearing cone. (VA1-type)
G11269913
 498447100 INSTALLER Used for installing the side oil seal. (VA1-type)
G05032468
 399520105 SEAT
  • Used for removing the side bearing cone. (VA1-type)
  • Used together with PULLER SET (899524100). (VA1-type)
G05002464
 899524100 PULLER SET
  • Used for removing the side bearing cone. (VA1-type)
  • Used together with SEAT (399520105).

  1. Puller
  2. Cap
G05342998
 498485400 DRIFT Used for installing side bearing cone. (VA1-type)
G05342999
 498505501 DIFFERENTIAL CARRIER GAUGE Used for adjusting pinion height. (VA1-type)
G05343000
 498447110 DRIFT Used for installing the front bearing race. (VA1-type)
G05343001
 498447150 DUMMY SHAFT Used for adjusting pinion height and preload. (VA1-type)
G05343003
 498515500 REMOVER Used for removing rear bearing cone. (VA1-type)
G05343005
 499705404 SEAT
  • Used for removing the side bearing race. (VA1-type)
  • Used together with PULLER ASSY (499705401).
G05343006
 499705401 PULLER ASSY
  • Used for removing the side bearing race. (VA1-type)
  • Used together with SEAT (499705404).
G11254795
 18270KA020 SOCKET (E20) Used for removing and installing the hypoid driven gear. (VA1-type)
G11254796
 41399FG001 SPECIAL TOOL ASSY
  • Used for removing and installing the rear differential mount bushing.
  • Use (1), (2), (5), (6), (7), (8) and (9) for removal.
  • Use (3), (4), (5), (6), (7), (8) and (9) for installation.

  1. SPECIAL TOOL A (41399FG010)
  2. SPECIAL TOOL C (41399FG031)
  3. SPECIAL TOOL B (41399FG020)
  4. SPECIAL TOOL D (41399FG041)
  5. SPECIAL TOOL SLEEVE (41399FG050)
  6. SPECIAL TOOL RING (41399FG061)
  7. SPECIAL TOOL NUT (41399FG070)
  8. SPECIAL TOOL BEARING (41399FG080)
  9. SPECIAL TOOL SHAFT (41399FG091)
G11254797
 41399FG010 SPECIAL TOOL
  • A Used for removing the rear differential mount bushing.
  • For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254798
 41399FG020 SPECIAL TOOL B
  • Used for installing the rear differential mount bushing.
  • For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254799
 41399FG031 SPECIAL TOOL C
  • Used for removing the rear differential mount bushing.
  • For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254800
 41399FG041 SPECIAL TOOL D
  • Used for installing the rear differential mount bushing.
  • For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254801
 41399FG050 SPECIAL TOOL SLEEVE
  • Used for removing and installing the rear differential mount bushing.
  • For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254802
 41399FG061 SPECIAL TOOL RING
  • Used for removing and installing the rear differential mount bushing.
  • For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254803
 41399FG070 SPECIAL TOOL NUT
  • Used for removing and installing the rear differential mount bushing.
  • For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254804
 41399FG080 SPECIAL TOOL BEARING
  • Used for removing and installing the rear differential mount bushing.
  • For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11254805
 41399FG091 SPECIAL TOOL SHAFT
  • Used for removing and installing the rear differential mount bushing.
  • For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
G11269934
 - (Newly adopted tool) SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
scientia non olet · About LEMON Manuals