Parking Brake Assembly (Rear Disc Brake): Inspection

1. Measure the inner diameter of the rear disc rotor. If scoring or worn is found on the disc, replace the rear disc rotor.

   Disc rotor inner diameter:

   Specification: 170 mm (6.69 in)

   Service limit: 171 mm (6.73 in)

2. Measure the lining thickness. If it exceeds the limit, replace the brake shoe.

Lining thickness: 

Specification: 3.5 mm (0.14 in)

Service limit: 1.5 mm (0.059 in)