LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Stop Light Switch >> Installation

Stop Light Switch: Installation

  1. Install the stop light switch.
    CAUTION:
    • Turn the stop light switch clockwise when installing so that it can return backward by approximately 1 mm (0.04 in) and clearance is automatically adjusted.
    • If it is hard to turn the switch, reduce the switch pushing force and turn it.
  2. Adjust the stop light switch position, and then secure the stop light switch by turning it clockwise. Ref. to BRAKE>Stop Light Switch>ADJUSTMENT .
  3. Install each part in the reverse order of removal.
  4. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals