LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Stop Light Switch >> Inspection >> Clearance Check

Clearance Check

  1. Measure the clearance between the end of the stop light switch and the stopper.

    Specification: 

    Clearance (A) of the stop light switch: 1 mm - 2 mm (0.04 in - 0.08 in)

    Fig 1: Measuring Clearance Between End Of Stop Light Switch And Stopper
    G11270383Courtesy of SUBARU OF AMERICA, INC.
  2. Adjust the position of the stop light switch if the inspection result is not within the standard value. Ref. to BRAKE>Stop Light Switch>ADJUSTMENT .
scientia non olet · About LEMON Manuals